Satellite Dish Installation Guide

satellite installation

It looks like almost everyone now wants to get their satellite TV installation done by self. Though there is nothing incorrect about taking things into your own hands to save some money, some research and a cautious approach is highly advised. That being said, self-installing satellite TV is not at all intimidating. The following tips for installing satellite TV should keep you in good stead.

Dish Positioning

The dish’s positioning is the major aspect of satellite TV installation. Sans correct positioning, your reception quality would be average at best. The focal point of the dish must be facing the orbiting satellite. Your dish TV installation manual will guide you on determining satellite direction. The information for the same must be looked up as per your location’s zip code. If you still need some help, copy what your neighbor has done with the dish.

The dish’s horizontal and azimuthal direction and the satellite’s elevation coordinate could be discovered with a compass needle’s help if needed.


The satellite TV dish antenna should be installed at a place with a clear view of the sky. Obstructions such as buildings, trees, mountains, etc. coming in the way of the dish and the orbiting satellite could lead to poor communication between the two. Moreover, the dish antenna mustn’t be more than 100 feet away from the receiver.

Set Up

Make sure the mast is bolted down secure and firm. It’s extremely important that it’s plumb in any given direction. If needed, use the post or magnetic level for assistance. Post cable connection, it’s now time for some adjustments. Regardless of what you do, just do not fasten the dish down.

Signal testing is the next stage, for which you may use a signal meter that’s easily available at any electronics store. Ensure the manufacturer instructions are religiously adhered to during this stage or dish

Read Manufacturer Instructions

Before taking the tools out, read through the user manual or factory instructions. By doing so, you are not just sure of the steps to be taken at every step, but you also get familiar with handy installation tricks and techniques. Moreover, you can also confirm availability of all appropriate tools needed for the project. This would also help you get ready for the task and understand the journey ahead.

Supplementary Tools

Besides the basic tools found in homes, a few other items could come in handy too. Though the items mentioned are not imperative for a successful installation, they do make the job in hand easier. For instance, an angle finder could help with the proper aligning of equipment. Also, an adjustable wrench could assist with the large-sized bolts and nuts and negate the requirement for locating the right sized socket.

Buying Installation Tools

The tools needed for installation can be easily found at specialty online and brick-and-mortar stores. Buying online is recommended since it’s much convenient and the prices are comparatively cheaper too. However, if the hardware store is nearby and it won’t take more than an hour to have the necessary items home, then buying offline is recommended.


Some people are passionate about learning new things and getting their hands dirty. If you’re not one of those types, it’s recommended you hire a professional to get the job done. After all, the DIY work should seem enlightening and interesting and not an unnecessary chore.

How to set up a Sky or Freesat Dish

Leave a Reply

Your email address will not be published. Required fields are marked *